Model S: Won’t drive after a rebuilt rear drive unit was installed
In plain words
The car came in with a whine from the rear drive unit. After a rebuilt drive unit went in, the gear icon turned red and the car would not move. The shop found the motor speed sensor unplugged. Plugging it back in cleared the alert and the car drove normally.
FOR A QUALIFIED TECHNICIAN (shop notes, as recorded)
Symptoms
Original: consistent whining noise from rear during operation, isolated to rear drive unit. After installing rebuilt rear LDU: PRND icon turns red, kW gauge shows yellow triangles with exclamation points, vehicle will not move forward or reverse when accelerator pressed. Coolant residue noted at disconnected motor speed sensor.
Alerts shown
DI_w020_hwMotorEncoderTHC_w0176_MCUCanTmo
Safety: This repair involves the high-voltage battery and drive system. Leave diagnosis and parts replacement to a qualified technician with high-voltage training and the right equipment.
Tests run
- Road test confirmed rear whining noise
- Underbody shields removed, vehicle raised, operational test isolated noise to rear drive unit
- Rebuilt LDU installed from eBay source
- After install: system alerts present and no propulsion
- Motor speed sensor (rotor position encoder) found unplugged
Confirmed fix
Reconnecting the unplugged motor speed sensor (Speed Encoder / rotor position encoder) cleared the DI_w020_hwMotorEncoder alert and restored normal propulsion. THC_w0176 was secondary/transient. Coolant at sensor indicates known LDU rotor seal issue but was not the cause of the immediate no-drive alerts.
Parts
- Rear Large Drive Unit (rebuilt)
- Motor Speed Sensor / Rotor Position Encoder
Related cases
Want this checked? Book S 3 X Y Auto Service, Mission Viejo
Book S 3 X Y Auto Service Call (949) 741-7399