Model S: Frunk pops but won’t lift on its own
In plain words
The frunk released but stayed held down and would not rise by itself. The latch tested fine. The hood’s gas struts were too weak, and replacing both fixed it.
FOR A QUALIFIED TECHNICIAN (shop notes, as recorded)
Symptoms
2023 Model S frunk hood pops slightly (primary latch releases) but remains held by secondary latch and will not lift fully without manual assistance. After forcing open, latch assembly tested OK and released properly, but gas struts provided insufficient upward pressure to raise the hood when unlatched. No wheel-well emergency release cables present (normal for 2021+ Palladium platform).
Tests run
- Commanded frunk open while gently pulling up on hood — successfully opened
- Inspected latch assembly after open — functioning correctly
- Observed lack of lift force from gas struts once latches disengaged
Confirmed fix
Replaced both hood gas struts. Frunk now opens fully with normal upward pressure from the struts and latches properly.
Parts
- Hood Gas Strut LH (left-hand)
- Hood Gas Strut RH (right-hand)
Related cases
Want this checked? Book S 3 X Y Auto Service, Mission Viejo
Book S 3 X Y Auto Service Call (949) 741-7399