Model X: 2018 shows “Unable to drive” in battery limp mode
In plain words
This 2018 Model X 100D powered on but showed “Unable to drive” and went into battery limp mode. Battery alerts pointed to an open circuit in the wiring that reads cell voltages inside the high-voltage battery. A specialist shop repaired that wiring inside the pack.
FOR A QUALIFIED TECHNICIAN (shop notes, as recorded)
Symptoms
Vehicle powers on but will not drive (Unable to drive). BMS cannot transition to requested state, puts vehicle in limp mode due to condition that would damage HV (high voltage) system. Active alerts indicate open circuit on Voltage Sense Harness (VSH) with voltage growth in opposite direction among two bricks, plus 12V system power reduced.
Alerts shown
BMS_f071_SW_SM_TransCon_Not_MetBMS_u008_limpModeBMS_w177_OpenVshDetectedGTW_w405_12VNotSupported
Safety: This repair involves the high-voltage battery and drive system. Leave diagnosis and parts replacement to a qualified technician with high-voltage training and the right equipment.
Tests run
- 12V system verification
- Toolbox / Service Mode diagnostics showing specific brick voltage anomalies consistent with open VSH
- External connector inspection
Confirmed fix
Sent the vehicle to a specialist shop that repaired the wiring harness (Voltage Sense Harness / sense ribbon) inside the high-voltage battery pack.
Related cases
Want this checked? Book S 3 X Y Auto Service, Mission Viejo
Book S 3 X Y Auto Service Call (949) 741-7399