Model X: 2020 won’t drive or charge after a fast charge
In plain words
This 2020 Model X would not drive or charge after a high-rate charge. Its battery reported impossible cell voltages, and the 12V battery ran down. A specialist shop repaired the wiring that reads cell voltages inside the high-voltage battery.
FOR A QUALIFIED TECHNICIAN (shop notes, as recorded)
Symptoms
Vehicle will not drive or charge. BMS State Fault, contactors open after high-rate charge event. Live brick voltages reported as impossible 2.1 V min / 5.0 V max while pack at ~383 V. Isolation high (3660 kΩ), CAC healthy 254-259 Ah. 12V battery drained to ~4 V because DCDC could not support LV (low voltage, the 12V system) while contactors open.
Alerts shown
BMS_w177_OpenVshDetectedBMS_f107_SW_Cell_Voltage_SensorBMS_f017_SW_Brick_OVBMS_w155_SW_BMB_Vref_leakyBMS_u008_limpModeGTW_w174_Replace12VBatteryGTW_w404_lvBattReqPermSupport
Safety: This repair involves the high-voltage battery and drive system. Leave diagnosis and parts replacement to a qualified technician with high-voltage training and the right equipment.
Tests run
- Toolbox Garage: BMS FAULT, contactors OPEN, pack 383 V, min/max brick 2.1/5.0 V, iso 3660 kOhm, CAC 254/257/259 Ah
- CAN (Controller Area Network, the car's data network) Explorer: only min/max brick signals available; max brick ID chatter during charge then contactor hunting to OPEN
- Alert articles: w177 High VSH impedance, f107 inaccurate brick measurement, f017 inaccurate measurement (not real OV), w155 BMB VREF leaky
- 12V found at 4 V on arrival; supported with charger
Confirmed fix
Sent the vehicle to a specialist shop that repaired the Voltage Sense Harness (VSH / sensing harness) inside the high-voltage battery pack.
Related cases
Want this checked? Book S 3 X Y Auto Service, Mission Viejo
Book S 3 X Y Auto Service Call (949) 741-7399