Model X: Parking sensors stopped working after bumper work
In plain words
After the front bumper was removed for headlamp work, the parking sensors stopped working. One sensor connector was not fully clipped in. Seating it restored the sensors.
FOR A QUALIFIED TECHNICIAN (shop notes, as recorded)
Symptoms
Parking sensors not working after front fascia reassembly following headlamp repair. Park assist unavailable.
Alerts shown
PARK3_w002_s1_linCommError
Tests run
- Service Mode identified PARK3_w002_s1_linCommError (LIN communication fault on front sensor S1, driver's side outermost front sensor)
- Inspected front fascia harness and S1 sensor connector after recent bumper-off headlamp work
- Found S1 sensor connector not fully clipped/seated
Confirmed fix
Fully seating/clipping the S1 (driver's side outermost front) parking sensor connector restored LIN communication and parking sensor function.
Related cases
Want this checked? Book S 3 X Y Auto Service, Mission Viejo
Book S 3 X Y Auto Service Call (949) 741-7399